Applicable Systems
Allrounder
Symptoms
System pressure is outside the acceptable range. Operation may be affected.
Possible Causes
- Pressure regulator out of adjustment
- Hydraulic or pneumatic leak in the system
- Pump performance below specification
Troubleshooting Steps
- Step 1: Measure actual pressure and compare with setpoint
Pressure deviation confirmed - Step 2: Inspect system for leaks at fittings and seals
Leaks repaired if found - Step 3: Check pump output and regulator setting
Pump and regulator within specification
How to Reset
To reset: Clear the pressure fault after restoring pressure within range.
Source: Arburg Allrounder Manual, Arburg GmbH + Co KG
Category: Injection Molding