Applicable Systems
Series 0i
Series 16/18/21
Alpha
Beta
Symptoms
The H or D tool compensation value exceeds the allowable limit.
Possible Causes
- The tool compensation value is too large for the specified axis.
- Incorrect tool offset data entry.
Troubleshooting Steps
- Step 1: Check the H or D compensation value in the offset table.
Excessive compensation value identified. - Step 2: Reduce the compensation value to within the valid range.
Compensation value accepted after correction.
How to Reset
Correct the compensation value and reset to clear the alarm.
Source: Fanuc 0i/0iMate Alarm Code List, FANUC Corporation
Category: CNC