Fanuc 0i Error Code 092

Fanuc CNC Minor P/S Alarm

Model: FANUC Series 0i / 0i Mate | Code: 092

Applicable Systems
Series 0i Series 16/18/21 Alpha Beta

Symptoms

G27 reference point check detected that an axis did not return to the reference point.

Possible Causes

  • The axis position does not match the reference point when G27 is executed.
  • Axis was moved away from the reference point after return.

Troubleshooting Steps

  1. Step 1: Check the axis position relative to the reference point.
    Position mismatch identified.
  2. Step 2: Perform reference point return and retry G27.
    G27 check passes after reference return.

How to Reset

Return to the reference point and reset to clear the alarm.

Related Fanuc Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Fanuc 0i/0iMate Alarm Code List, FANUC Corporation

Category: CNC