Applicable Systems
Series 0i
Series 16/18/21
Alpha
Beta
Symptoms
Y axis servo parameter is incorrect.
Possible Causes
- Servo parameter setting is invalid or out of range.
- Parameter corruption or incorrect configuration.
Troubleshooting Steps
- Step 1: Verify and correct servo parameters.
Parameter error identified. - Step 2: Initialize parameters if corruption is suspected.
Parameters corrected and alarm cleared.
How to Reset
Set correct parameters and reset to clear the alarm.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: Fanuc 0i/0iMate Alarm Code List, FANUC Corporation
Category: CNC
No comments yet. Be the first to share your experience!