GSK 980TD/980TDB/980TDC Alarm 1033

GSK CNC Moderate GSK Alarm

Model: 980TD/980TDB/980TDC | Code: 1033

Applicable Systems
980TDi 928 218 988 GSK 25i

Symptoms

Alarm 1033: Spindle jogging function is invalid under invalid analog spindle. The GSK 980TD/980TDB/980TDC CNC system displays this alarm on the operator panel.

Possible Causes

  • Refer to the machine manual for detailed cause analysis
  • Check related sensors, switches, and parameters

Troubleshooting Steps

  1. Step 1: Read alarm 1033 on the CNC display and note the full alarm message
    Alarm code and description displayed for diagnosis
  2. Step 2: Check the machine status and identify any obvious mechanical, electrical, or pneumatic issues
    Visible faults identified or confirmed as intermittent
  3. Step 3: Consult the manufacturer manual for alarm-specific troubleshooting procedures
    Root cause identified per manufacturer guidelines
  4. Step 4: Apply the recommended fix and reset the alarm
    Alarm cleared and machine resumed normal operation

How to Reset

To reset alarm 1033: 1) Address the root cause. 2) Press the RESET key on the CNC panel. 3) If the alarm persists, cycle power to the control. Caution: Repeated alarms without fixing the cause may cause damage.

Frequently Asked Questions

  • Q: What does alarm 1033 mean?

    Alarm 1033 corresponds to: Spindle jogging function is invalid under invalid analog spindle. This is a 980TD/980TDB/980TDC system alarm that typically requires checking machine state and the manufacturer manual.

Related GSK Fault Codes

Source: HelmanCNC.com - https://www.helmancnc.com/gsk-cnc-alarm-list-gsk980td-gsk980tdb-gsk980tdc/

Category: CNC