Applicable Systems
Haas CNC Mill (VF/VM Series)
Symptoms
Z axis servo error is too large, indicating excessive position deviation.
Possible Causes
- Excessive load or mechanical binding on the Z axis.
- Servo gain parameter mismatch.
Troubleshooting Steps
- Step 1: Check for mechanical binding on the Z axis.
Binding or load identified. - Step 2: Adjust servo gain or reduce load.
Servo error reduced to normal.
How to Reset
Fix the servo deviation cause and reset to clear the alarm.
Source: Haas Alarm Codes, Haas Automation
Category: CNC