Applicable Systems
Haas CNC Mill (VF/VM Series)
Symptoms
The Haas CNC control displays a tool changer fault. The automatic tool changer may not complete its cycle.
Possible Causes
- Tool changer arm position fault
- Tool pot misalignment
- Tool clamp/unclamp fault
- Tool number not found
- ATC motor or solenoid fault
- Control software needs update
Troubleshooting Steps
- Step 1: Record the Haas alarm code 572 and note the machine operating state
Alarm code and context are documented - Step 2: Check the Haas operator manual alarm reference for code details
Alarm description and recommended actions identified - Step 3: Inspect the Tool subsystem for visible faults or damage
No visible damage or abnormal conditions found - Step 4: Check relevant parameters and settings per Haas service documentation
Values match expected settings or discrepancies identified - Step 5: Reset the alarm per Haas procedure and test machine operation
Alarm clears and machine operates normally, or alarm returns
How to Reset
To reset Haas alarm 572: 1) Resolve the underlying fault per the troubleshooting steps. 2) Press the RESET key on the Haas control panel. 3) If the alarm persists, press EMERGENCY STOP, release it, then press RESET. 4) If still present, power cycle the machine. 5) Contact Haas service if the alarm persists after reboot.
Frequently Asked Questions
- Q: What does Haas alarm 572 mean?
Alarm 572 indicates: Tool Changer Fault Tool 3. This is a Haas CNC control alarm related to Tool.
- Q: How do I clear Haas alarm 572?
Fix the root cause, press RESET. If persistent, cycle E-STOP and RESET. If still present, power cycle the machine. Contact Haas service if it returns.
- Q: Is Haas alarm 572 critical?
Severity: Major. Reduce operations and service promptly.
Source: Haas CNC Alarm List / Haas Service Manual
Category: CNC