Applicable Systems
Haas CNC Mill (VF/VM Series)
Symptoms
Alarm 705: Bar Feeder Interlock Error. The bar feeder interlock is in an unexpected state.
Possible Causes
- Hardware or system issue related to: Bar Feeder Interlock Error
- Component failure or connectivity issue
- Environmental or operational factor
- Configuration or parameter mismatch
Troubleshooting Steps
- Step 1: Read alarm 705 on the Haas control display
Alarm code and description captured - Step 2: Check machine status and inspect related components for visible issues
Fault identified or confirmed intermittent - Step 3: Consult the Haas service manual for alarm-specific procedures
Root cause identified per Haas guidelines - Step 4: Apply the recommended fix and reset the alarm
Alarm cleared, machine resumed normal operation
How to Reset
To reset: 1) Address the root cause of alarm 705. 2) Press RESET on the Haas control. 3) If alarm persists, power-cycle the machine. Caution: Do not bypass safety interlocks.
Frequently Asked Questions
- Q: What does Haas alarm 705 mean?
Alarm 705 indicates: Bar Feeder Interlock Error. The bar feeder interlock is in an unexpected state.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: Haas Automation Service Manual, cnccode.com/errorcodefixes.com
Category: CNC
No comments yet. Be the first to share your experience!