Kia P1177: Kia OBD-II Error Code P1177

Symptoms

The TCM has detected a manufacturer-specific transmission fault. The transmission may default to limp mode. DTC P1177 is stored in the Kia engine control module.

Possible Causes

Transmission solenoid fault
Transmission fluid temperature high
Gear ratio incorrect
TCM internal fault

Troubleshooting Steps

Step 1: Connect an OBD-II scanner and read DTCs to confirm P1177
DTC P1177 present with freeze frame data
Step 2: Inspect wiring and connectors in the affected circuit for damage, corrosion, or loose pins
Wiring intact, connectors clean and seated
Step 3: Perform component-level testing per manufacturer service manual
Component values within spec or component confirmed faulty
Step 4: Repair or replace the faulty component, clear DTC, and verify no return
DTC cleared and does not return after a road test

How to Reset

Clear the DTC after repair using a diagnostic scanner. The code clears automatically if the fault is not detected for 3 consecutive drive cycles.

Common Replacement Parts

varies: Diagnose and replace the confirmed faulty component (Confirm part number via VIN at a Kia dealership)

Frequently Asked Questions

Q: What does P1177 mean?
This manufacturer-specific DTC indicates a transmission system fault. Refer to the vehicle's service manual for the exact diagnostic procedure.
Q: Can I drive with P1177?
Limited driving is possible, but the affected system may not operate correctly. Have the vehicle diagnosed promptly to prevent potential damage.

Kia OBD-II Error Code P1177