Applicable Systems
GX
Symptoms
A filter or strainer is clogged, restricting flow and reducing system performance.
Possible Causes
- Filter element saturated with debris
- Filter not replaced at recommended interval
- Excessive contamination in the system
Troubleshooting Steps
- Step 1: Inspect filter element and housing for blockage
Filter element visibly clogged - Step 2: Clean or replace the filter element
New or cleaned filter installed - Step 3: Verify flow is restored after filter service
Flow rate back to normal
How to Reset
To reset: Clear the filter alarm after replacing or cleaning the filter element.
Source: KraussMaffei Injection Molding Manual, KraussMaffei Group
Category: Injection Molding