Applicable Systems
MAZATROL MATRIX
MAZATROL Smooth
INTEGREX
Symptoms
Alarm 376: MAIN POWER TURNING OFF MALFUNCTION. The CNC system displays this alarm on the operator panel.
Possible Causes
- Power supply voltage abnormal
- Circuit breaker tripped due to overload or short
Troubleshooting Steps
- Step 1: Read alarm 376 on the CNC display and note the full alarm message
Alarm code and description displayed for diagnosis - Step 2: Check the machine status and identify any obvious mechanical, electrical, or pneumatic issues
Visible faults identified or confirmed as intermittent - Step 3: Consult the manufacturer manual for alarm-specific troubleshooting procedures
Root cause identified per manufacturer guidelines - Step 4: Apply the recommended fix and reset the alarm
Alarm cleared and machine resumed normal operation
How to Reset
To reset alarm 376: 1) Address the root cause. 2) Press the RESET key on the CNC panel. 3) If the alarm persists, cycle power to the control. Caution: Repeated alarms without fixing the cause may cause damage.
Frequently Asked Questions
- Q: What does alarm 376 mean?
Alarm 376 indicates: MAIN POWER TURNING OFF MALFUNCTION. Follow the troubleshooting steps to resolve the issue.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: HelmanCNC.com - https://www.helmancnc.com/mazak-plc-alarm-list/
Category: CNC
No comments yet. Be the first to share your experience!