Applicable Systems
M700V
M70V
M800
M80
C80
Symptoms
Alarm A077: Program error - syntax or logic error in machining program. The CNC system displays this alarm on the operator panel.
Possible Causes
- Programming syntax error in the NC program
- Invalid or unsupported command used
Troubleshooting Steps
- Step 1: Read alarm A077 on the CNC display and note the full alarm message
Alarm code and description displayed for diagnosis - Step 2: Check the machine status and identify any obvious mechanical, electrical, or pneumatic issues
Visible faults identified or confirmed as intermittent - Step 3: Consult the manufacturer manual for alarm-specific troubleshooting procedures
Root cause identified per manufacturer guidelines - Step 4: Apply the recommended fix and reset the alarm
Alarm cleared and machine resumed normal operation
How to Reset
To reset alarm A077: 1) Address the root cause. 2) Press the RESET key on the CNC panel. 3) If the alarm persists, cycle power to the control. Caution: Repeated alarms without fixing the cause may cause damage.
Frequently Asked Questions
- Q: What does alarm A077 mean?
Alarm A077 indicates: Program error - syntax or logic error in machining program. Follow the troubleshooting steps to resolve the issue.
Source: https://cncalarms.com/ and Mitsubishi M70 alarm code references
Category: CNC