Applicable Systems
OBD-II
Symptoms
The seat belt warning light stays on. The seat belt pretensioner may not fire in a crash, or the buckle switch may be faulty. DTC B0150 is stored in the body control module.
Possible Causes
- Seat belt pretensioner squib circuit fault
- Buckle switch not making contact
- Seat belt retractor mechanism fault
- Pretensioner wiring connector under seat corroded
Troubleshooting Steps
- Step 1: Connect a diagnostic scanner and read body DTCs to confirm B0150
DTC B0150 is present with freeze frame data - Step 2: Inspect wiring and connectors in the affected circuit
Wiring intact, connectors clean and properly seated - Step 3: Perform component-level testing per manufacturer diagnostic procedure
Component values within specification or component confirmed faulty - Step 4: Clear the DTC and verify it does not return
DTC does not return after system self-test
How to Reset
Clear the DTC after repair using a diagnostic scanner. The code will clear automatically if the fault is no longer detected after 3 consecutive drive cycles.
Common Replacement Parts
- varies: Seat belt assembly with pretensioner (per affected seat) (Confirm part number via VIN before ordering)
Frequently Asked Questions
- Q: What does code B0150 mean?
This is a body-related diagnostic trouble code indicating an issue with the seat belt system. The specific component should be diagnosed per the manufacturer's procedure.
- Q: Is code B0150 safe to ignore?
If the code relates to the airbag system (SRS), it is NOT safe to ignore as airbags may not deploy in a crash. For other body systems, the vehicle can typically be driven but the affected feature may not work.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: SAE J2012 Standard OBD-II Diagnostic Trouble Codes
Category: OBD-II
No comments yet. Be the first to share your experience!