Applicable Systems
OBD-II
Symptoms
The airbag warning light is on. The curtain airbag may not deploy correctly in a side impact or rollover. DTC B0195 is stored in the body control module.
Possible Causes
- Curtain airbag squib circuit fault
- Roll over sensor fault
- Headliner wiring damaged
- SRS module fault
Troubleshooting Steps
- Step 1: Connect a diagnostic scanner and read body DTCs to confirm B0195
DTC B0195 is present with freeze frame data - Step 2: Inspect wiring and connectors in the affected circuit
Wiring intact, connectors clean and properly seated - Step 3: Perform component-level testing per manufacturer diagnostic procedure
Component values within specification or component confirmed faulty - Step 4: Clear the DTC and verify it does not return
DTC does not return after system self-test
How to Reset
Clear the DTC after repair using a diagnostic scanner. The code will clear automatically if the fault is no longer detected after 3 consecutive drive cycles.
Common Replacement Parts
- varies: Curtain airbag module (per affected side) (Confirm part number via VIN before ordering)
Frequently Asked Questions
- Q: What does code B0195 mean?
This is a body-related diagnostic trouble code indicating an issue with the airbag system. The specific component should be diagnosed per the manufacturer's procedure.
- Q: Is code B0195 safe to ignore?
If the code relates to the airbag system (SRS), it is NOT safe to ignore as airbags may not deploy in a crash. For other body systems, the vehicle can typically be driven but the affected feature may not work.
Source: SAE J2012 Standard OBD-II Diagnostic Trouble Codes
Category: OBD-II