OBD-II Error Code P0106 - MAP/BARO Circuit Range/Performance

OBD-II Standard OBD-II Minor Fuel and Air Metering

Model: SAE J2012 Standard | Code: P0106

Applicable Systems
OBD-II

Symptoms

Check engine light is on. The engine may idle roughly, have reduced fuel economy, or hesitate during acceleration. The MAP sensor readings are outside the expected range for given operating conditions.

Possible Causes

  • Vacuum leak in the intake manifold or hoses
  • Faulty MAP sensor with calibration drift
  • Clogged MAP sensor vacuum port
  • Throttle body carbon buildup
  • ECM software needs update for MAP calibration

Troubleshooting Steps

  1. Step 1: Connect an OBD-II scan tool and read all stored DTCs and freeze frame data
    All DTCs and freeze frame data are retrieved
  2. Step 2: Inspect the related sensor or actuator wiring for damage, corrosion, or loose connections
    Wiring and connectors are in good condition
  3. Step 3: Use a digital multimeter to check sensor voltage, resistance, and reference signals per manufacturer specifications
    Values are within specified range
  4. Step 4: Perform component-level testing of the suspected sensor or actuator
    Component passes or fails definitively
  5. Step 5: Clear codes and road test to verify repair
    Code does not return and system operates normally

How to Reset

To reset code P0106: 1) Repair the underlying fault. 2) Use an OBD-II scan tool to clear the DTC. 3) Perform a drive cycle to verify the monitor completes. 4) If the code returns, further diagnosis is needed. Caution: Do not clear codes without fixing the root cause.

Frequently Asked Questions

  • Q: What does OBD-II code P0106 mean?

    Code P0106 indicates: MAP/BARO Circuit Range/Performance. This is a SAE J2012 standard diagnostic trouble code related to Fuel and Air Metering.

  • Q: Is code P0106 serious?

    Severity: Minor. The vehicle can typically be driven but should be diagnosed soon.

  • Q: Can I drive with code P0106?

    You can usually drive cautiously but should have it diagnosed and repaired promptly.

  • Q: How do I fix code P0106?

    Diagnose the Fuel and Air Metering system, check wiring and connectors, test the related sensor or actuator, and replace faulty components as needed.

Related OBD-II Standard Fault Codes

Source: SAE J2012 Standard - Powertrain Diagnostic Trouble Codes

Category: OBD-II