Applicable Systems
OBD-II
Symptoms
The check engine light illuminates. The engine may run normally but emissions may be elevated. An auxiliary emission control system component has a malfunction.
Possible Causes
- Faulty EGR valve or EGR system component
- EVAP system purge valve or vent valve fault
- Secondary air injection system component failure
- Catalyst efficiency below threshold
- Oxygen sensor heater circuit malfunction
Troubleshooting Steps
- Step 1: Connect an OBD-II scan tool and read all stored DTCs and freeze frame data
All DTCs and freeze frame data are retrieved - Step 2: Inspect the related wiring and connectors for the indicated system
Wiring and connectors are in good condition - Step 3: Use a digital multimeter to check sensor voltage, resistance, and continuity per manufacturer specifications
Values are within specified range - Step 4: Test the related actuator, sensor, or solenoid for proper operation
Component operates within specification or fails definitively - Step 5: Clear codes and perform a road test or drive cycle to verify repair
Code does not return and system operates normally
How to Reset
To reset code P0459: 1) Repair the underlying fault. 2) Use an OBD-II scan tool to clear the DTC. 3) Perform a drive cycle to verify the monitor completes. 4) If the code returns, further diagnosis is needed. Caution: Do not clear codes without fixing the root cause.
Frequently Asked Questions
- Q: What does OBD-II code P0459 mean?
Code P0459 indicates: Auxiliary Emission Controls - Code 459. This is a SAE J2012 standard diagnostic trouble code related to Auxiliary Emission Controls.
- Q: How serious is code P0459?
Severity: Minor. The vehicle can typically be driven but should be diagnosed soon.
- Q: Can I drive with code P0459?
You can usually drive cautiously but should have it repaired promptly.
- Q: How do I fix code P0459?
Diagnose the Auxiliary Emission Controls system, check wiring and connectors, test related components, and replace faulty parts as needed.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: SAE J2012 Standard - Powertrain Diagnostic Trouble Codes
Category: OBD-II
No comments yet. Be the first to share your experience!