OBD-II Standard P1405: OBD-II Error Code P1405

Symptoms

The VVT-i oil control valve for bank 2 circuit voltage is above expected. VVT-i operation is disabled on bank 2.

Step 1: Connect an OBD-II scan tool and read all stored DTCs and freeze frame data
All DTCs and freeze frame data are retrieved
Step 2: Inspect the related sensor or actuator wiring for damage, corrosion, or loose connections
Wiring and connectors are in good condition
Step 3: Use a digital multimeter to check sensor voltage, resistance, and reference signals per manufacturer specifications
Values are within specified range
Step 4: Perform component-level testing of the suspected sensor or actuator
Component passes or fails definitively
Step 5: Clear codes and road test to verify repair
Code does not return and system operates normally

To reset code P1405: 1) Repair the underlying fault. 2) Use an OBD-II scan tool to clear the DTC. 3) Perform a drive cycle.

Q: What does OBD-II code P1405 mean?
Code P1405 indicates: VVT-i Oil Control Valve Bank 2 Circuit High. This is a Toyota manufacturer-specific diagnostic trouble code.
Q: Is code P1405 serious?
Severity: Major. Service as needed.
Q: How do I fix code P1405?
Diagnose the VVT-i system and replace faulty components.