Applicable Systems
OBD-II
Symptoms
The check engine light illuminates. Emissions may be elevated and fuel economy may decrease.
Possible Causes
- Software calibration needs update
- Power supply voltage out of range
- Ground connection poor or corroded
- Sensor mounting loose or misaligned
- Component incompatible with vehicle
Troubleshooting Steps
- Step 1: Connect an OBD-II scan tool and read all stored DTCs and freeze frame data
All DTCs and freeze frame data are retrieved - Step 2: Inspect the related sensor or actuator wiring for damage, corrosion, or loose connections
Wiring and connectors are in good condition - Step 3: Use a digital multimeter to check sensor voltage, resistance, and reference signals per manufacturer specifications
Values are within specified range - Step 4: Perform component-level testing of the suspected sensor or actuator
Component passes or fails definitively - Step 5: Clear codes and road test to verify repair
Code does not return and system operates normally
How to Reset
To reset code P2173: 1) Repair the underlying fault. 2) Use an OBD-II scan tool to clear the DTC. 3) Perform a drive cycle to verify.
Frequently Asked Questions
- Q: What does OBD-II code P2173 mean?
Code P2173 indicates: Catalyst Efficiency - Extended Code P2173. This is a powertrain extended diagnostic trouble code.
- Q: Is code P2173 serious?
Severity: Major. Service as needed based on symptoms.
- Q: How do I fix code P2173?
Diagnose the Emissions system, check wiring and connectors, and replace faulty components.
Source: OBD-II Manufacturer Extended Codes / SAE J2012 / OBD-Codes.com
Category: OBD-II