Applicable Systems
GTM
Symptoms
The weaving machine reports a selvedge fault. The fabric edge or selvedge mechanism is malfunctioning.
Possible Causes
- Selvedge yarn tension incorrect
- Selvedge device timing off
- Selvedge yarn break or tangle
Troubleshooting Steps
- Step 1: Check the selvedge yarn tension
Tension is within specification - Step 2: Verify the selvedge device timing
Timing is correct for the weave - Step 3: Inspect for selvedge yarn breaks or tangles
Yarns are intact and feeding
How to Reset
To reset: Repair the selvedge mechanism, then clear the alarm.
Source: Picanol Weaving Machine Manual, Picanol NV
Category: Textile