Applicable Systems
Schindler Control System
Symptoms
Elevator detected cabin overload via CLC (cabin load controller)
Possible Causes
- Cabin load exceeds rated capacity
- load measurement signal fault
- CLC calibration error
Troubleshooting Steps
- Step 1: Reduce cabin load
Verify the fault is resolved after completing this step. - Step 2: check load measurement device wiring
Verify the fault is resolved after completing this step. - Step 3: recalibrate CLC if signal invalid
Verify the fault is resolved after completing this step.
How to Reset
Remove excess load; power cycle
Source: book118 Bionic 3300 diagnostic manual; diantijob.com/175389.html
Category: Elevator