KET-S activated without door close command

Schindler Elevator Medium Elevator

Model: Bionic/3300 | Code: 0312

Applicable Systems
Schindler Control System

Symptoms

KET-S (door lock signal) activated without DOOR_CLOSE/DOOR_LOCK command

Possible Causes

  • Door lock signal detected without command
  • signal wiring error
  • relay fault

Troubleshooting Steps

  1. Step 1: Check KET-S signal wiring
    Verify the fault is resolved after completing this step.
  2. Step 2: verify relay operation
    Verify the fault is resolved after completing this step.
  3. Step 3: inspect door lock circuit
    Verify the fault is resolved after completing this step.

How to Reset

Power cycle after wiring check

Related Schindler Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: book118 Bionic 3300 diagnostic manual; diantijob.com/175389.html

Category: Elevator