Siemens 16#0009: Siemens S7-1500 Error Code 16#0009

Symptoms

The SF LED turns red. The CPU detects an error with the installed SIMATIC memory card. The diagnostic buffer logs a memory card read or write failure.

Possible Causes

Memory card is physically damaged or worn out
Memory card was removed while the CPU was writing to it
Memory card format is corrupted
Incompatible or counterfeit memory card

Troubleshooting Steps

Step 1: Power down the CPU and remove the memory card
Safe access to the card without risk of data corruption
Step 2: Inspect the memory card contacts for damage or contamination
Contacts are clean and undamaged
Step 3: Insert the memory card into a card reader and attempt to read it from a PC
Determine if the card is readable or has failed
Step 4: If the card is faulty, replace it with a genuine SIMATIC memory card and re-download the project
CPU recognizes the new card and operates normally

How to Reset

To reset: 1) Replace the faulty memory card with a new genuine SIMATIC memory card. 2. Re-download the hardware configuration and user program. 3. Power cycle the CPU. 4. Clear the diagnostic buffer. Caution: Only use genuine SIMATIC memory cards to ensure reliability and compatibility.

Common Replacement Parts

6ES7954-8LP02-00AA0: SIMATIC Memory Card 4MB (Use only genuine Siemens memory cards for guaranteed compatibility)

Frequently Asked Questions

Q: Can I use a standard SD card instead of a SIMATIC memory card?
No, only genuine SIMATIC memory cards are compatible and reliable for S7-1500 CPUs. Standard SD cards may cause data corruption.
Q: What happens if I remove the memory card while the CPU is running?
Removing the card during write operations can corrupt data and trigger this error. Always power down the CPU before removing the card.

Siemens S7-1500 Error Code 16#0009