Siemens Sinumerik 840D sl Error Code 10600

Siemens Sinumerik CNC Major NC Channel Alarm

Model: 840D sl | Code: 10600

Applicable Systems
SINUMERIK 840D SINUMERIK 840D sl SINUMERIK 840Di SINUMERIK ONE

Symptoms

Channel-specific NC alarm indicating an error in the machining channel. Alarm 10600 is displayed on the Sinumerik HMI.

Possible Causes

  • Program syntax error in NC channel
  • Channel configuration mismatch
  • Tool management data error
  • Channel axis configuration fault

Troubleshooting Steps

  1. Step 1: Read the alarm text on the HMI for alarm 10600
    Full alarm description displayed with cause details
  2. Step 2: Check the Siemens Sinumerik diagnostic manual for the specific alarm number
    Alarm cause and remedy described in the manual
  3. Step 3: Investigate the affected subsystem (NC, drive, PLC, or cycle) per the diagnostic procedure
    Root cause identified through systematic diagnosis
  4. Step 4: Correct the fault and acknowledge the alarm with the RESET key
    Alarm clears after fault correction and acknowledgment

How to Reset

Correct the fault and press RESET on the HMI to acknowledge and clear the alarm. Refer to the Sinumerik 840D sl Alarm List (A5E40869531) for detailed remedies.

Frequently Asked Questions

  • Q: What does Siemens Sinumerik alarm 10600 mean?

    This is a nc channel alarm from the Siemens Sinumerik 840D sl/828D CNC system. Channel-specific NC alarm indicating an error in the machining channel.

  • Q: How do I clear Siemens alarm 10600?

    Correct the underlying fault as described in the alarm message, then press the RESET key on the HMI to acknowledge and clear the alarm.

Related Siemens Sinumerik Fault Codes

Source: Siemens SINUMERIK 840D sl/828D Alarm List (A5E40869531), Siemens AG

Category: CNC