Siemens Sinumerik 840D sl Error Code 11342

Siemens Sinumerik CNC Minor NC Coordinate Alarm

Model: 840D sl | Code: 11342

Applicable Systems
SINUMERIK 840D SINUMERIK 840D sl SINUMERIK 840Di SINUMERIK ONE

Symptoms

Coordinate system related NC alarm. Alarm 11342 is displayed on the Sinumerik HMI.

Possible Causes

  • Work offset not set
  • Coordinate rotation parameter invalid
  • Transform data inconsistent
  • Base frame not defined

Troubleshooting Steps

  1. Step 1: Read the alarm text on the HMI for alarm 11342
    Full alarm description displayed with cause details
  2. Step 2: Check the Siemens Sinumerik diagnostic manual for the specific alarm number
    Alarm cause and remedy described in the manual
  3. Step 3: Investigate the affected subsystem (NC, drive, PLC, or cycle) per the diagnostic procedure
    Root cause identified through systematic diagnosis
  4. Step 4: Correct the fault and acknowledge the alarm with the RESET key
    Alarm clears after fault correction and acknowledgment

How to Reset

Correct the fault and press RESET on the HMI to acknowledge and clear the alarm. Refer to the Sinumerik 840D sl Alarm List (A5E40869531) for detailed remedies.

Frequently Asked Questions

  • Q: What does Siemens Sinumerik alarm 11342 mean?

    This is a nc coordinate alarm from the Siemens Sinumerik 840D sl/828D CNC system. Coordinate system related NC alarm.

  • Q: How do I clear Siemens alarm 11342?

    Correct the underlying fault as described in the alarm message, then press the RESET key on the HMI to acknowledge and clear the alarm.

Related Siemens Sinumerik Fault Codes

Source: Siemens SINUMERIK 840D sl/828D Alarm List (A5E40869531), Siemens AG

Category: CNC