Door lock contact RK/RKD stuck at floor 01

ThyssenKrupp Elevator High Elevator

Model: TCM/MC2 | Code: 01 01

Applicable Systems
ThyssenKrupp Control System

Symptoms

Door lock contact RK or RKD stuck at floor 01

Possible Causes

  • Door lock contact mechanically jammed
  • door lock circuit interrupted during running

Troubleshooting Steps

  1. Step 1: Check door lock contact RK/RKD at the indicated floor
    Verify the fault is resolved after completing this step.
  2. Step 2: inspect mechanical linkage
    Verify the fault is resolved after completing this step.
  3. Step 3: clean contacts
    Verify the fault is resolved after completing this step.

How to Reset

Power cycle / reset after repair

Related ThyssenKrupp Fault Codes

Source: beijiaxin.cn; zhihu.com/p/577262471; renrendoc MC2-C manual

Category: Elevator