Characteristic chip floor error (NN)

ThyssenKrupp Elevator Medium Elevator

Model: TCM/MC2 | Code: 03 03

Applicable Systems
ThyssenKrupp Control System

Symptoms

Characteristic chip detected floor position mismatch (subcode 03)

Possible Causes

  • Floor programming data error
  • sensor reading inconsistency

Troubleshooting Steps

  1. Step 1: Re-program floor data
    Verify the fault is resolved after completing this step.
  2. Step 2: replace characteristic chip if faulty
    Verify the fault is resolved after completing this step.

How to Reset

Re-run floor learning; power cycle

Related ThyssenKrupp Fault Codes

Source: beijiaxin.cn; zhihu.com/p/577262471; renrendoc MC2-C manual

Category: Elevator