Applicable Systems
ThyssenKrupp Control System
Symptoms
Rope monitoring switch activated - code 0A 04
Possible Causes
- Rope slack or rope break detected
- rope monitoring switch misalignment
Troubleshooting Steps
- Step 1: Inspect wire ropes
Verify the fault is resolved after completing this step. - Step 2: check rope monitoring switch
Verify the fault is resolved after completing this step. - Step 3: verify tension
Verify the fault is resolved after completing this step.
How to Reset
Power cycle after rope inspection
Source: beijiaxin.cn; zhihu.com/p/577262471; renrendoc MC2-C manual
Category: Elevator