Universal Robots e-Series Error Code C265A44: Signal decoding below confidence threshold - position decoding might be

Universal Robots Robot Minor System

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C265A44

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

inaccurate or fail. At least one-out-of-two decoding algorithms, from the sensor image, falls below the confidence threshold. The read head might be tilted.

Possible Causes

  • inaccurate or fail. At least one-out-of-two decoding algorithms, from the sensor image, falls below the confidence threshold. The read head might be tilted.

Troubleshooting Steps

  1. Step 1: Conduct a complete rebooting sequence,
    Check if the issue is resolved after this step
  2. Step 2: Update software,
    Check if the issue is resolved after this step
  3. Step 3: Contact your local Universal Robots service provider for assistance
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot