Universal Robots e-Series Error Code C265A52: System error. Inconsistent calibration data is detected.

Universal Robots Robot Major System

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C265A52

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

Inconsistent calibration data is detected. To reset the System error bit try to cycle the power supply. The power-supply rise time should be shorter than 20 ms.

Possible Causes

  • Inconsistent calibration data is detected. To reset the System error bit try to cycle the power supply. The power-supply rise time should be shorter than 20 ms.

Troubleshooting Steps

  1. Step 1: Conduct a complete rebooting sequence,
    Check if the issue is resolved after this step
  2. Step 2: Update software,
    Check if the issue is resolved after this step
  3. Step 3: Contact your local Universal Robots service provider for assistance
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot