Universal Robots e-Series Error Code C283A144: Tool safety inputs are configured but the robot type does not support it

Universal Robots Robot Critical Safety

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C283A144

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

The robot type does not support tool safety inputs

Possible Causes

  • The robot type does not support tool safety inputs

Troubleshooting Steps

  1. Step 1: Disable tool safety input,
    Check if the issue is resolved after this step
  2. Step 2: Update software,
    Check if the issue is resolved after this step
  3. Step 3: Contact your local Universal Robots service provider for assistance
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot