Universal Robots e-Series Error Code C283A62: Not Reduced Mode Output is not inactive

Universal Robots Robot Minor System

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C283A62

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

Failed to deactivate the Not Reduced Mode Output. The output is inactive when voltage is high

Possible Causes

  • Failed to deactivate the Not Reduced Mode Output. The output is inactive when voltage is high

Troubleshooting Steps

  1. Step 1: Make sure output is not short circuited to ground
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot

Published: 2026-10-30