Universal Robots e-Series Error Code C289A15: The momentary M8-power current of {float}A exceeded the allowed limit.

Universal Robots Robot Minor Power

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C289A15

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

The momentary current drawn from the M8-power connector exceeded the allowed limit.

Possible Causes

  • The momentary current drawn from the M8-power connector exceeded the allowed limit.

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot