Universal Robots e-Series Error Code C296A2: One or more Motor phases is short circuited to ground. Diagnostic data: {hex}

Universal Robots Robot Minor Motion

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C296A2

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

Bit 0 high indicates short circuit

Possible Causes

  • Bit 0 high indicates short circuit

Troubleshooting Steps

  1. Step 1: Contact your local Universal Robots service provider for assistance.
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot

Published: 2026-09-28