Applicable Systems
UR3
UR5
UR10
UR3e
UR5e
UR10e
UR16e
UR20
UR30
Symptoms
voltage is out of specified range. The voltage supplied for the motor encoder is outside allowed specifications
Possible Causes
- voltage is out of specified range. The voltage supplied for the motor encoder is outside allowed specifications
Troubleshooting Steps
- Step 1: Make sure the application is not exceeding the capabilities of the robot
Check if the issue is resolved after this step - Step 2: Conduct a complete rebooting sequence,
Check if the issue is resolved after this step - Step 3: Update software,
Check if the issue is resolved after this step - Step 4: Contact your local Universal Robots service provider for assistance
Check if the issue is resolved after this step
How to Reset
Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.
Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)
Category: Robot