Universal Robots e-Series Error Code C352A3: The brake solenoid was not engaged for the parking procedure. Solenoid

Universal Robots Robot Minor System

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C352A3

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

voltage: ? The brake solenoid must be engaged to perform the backdrive parking procedure.

Possible Causes

  • voltage: ? The brake solenoid must be engaged to perform the backdrive parking procedure.

Troubleshooting Steps

  1. Step 1: Update software,
    Check if the issue is resolved after this step
  2. Step 2: Contact your local Universal Robots service provider for assistance
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot