ABB ACS580 VFD Fault Code F0001

ABB Electrical Critical Current

Model: ACS580 | Code: F0001

Applicable Systems
ACS580 ACS880 ACS510 ACS550 ACS800

Symptoms

Output current exceeded the overcurrent trip threshold. This is the legacy format code used in older ABB drives (ACS510/550/800 series) equivalent to fault 2310 in newer models.

Possible Causes

  • Motor or cable short circuit
  • Excessive motor load or jam
  • Acceleration time too short
  • Motor parameters mismatch

Troubleshooting Steps

  1. Step 1: Check motor and cable insulation
    Insulation is within acceptable limits
  2. Step 2: Verify motor parameters match nameplate
    Parameters are correct
  3. Step 3: Increase acceleration time
    No overcurrent with longer accel time

How to Reset

To reset: Press RESET on the panel after resolving the overcurrent condition.

Related ABB Fault Codes

Source: ABB ACS510/550/800 Series Manual; ABB变频器故障代码速查表 (bilibili.com)

Category: Electrical