Applicable Systems
PowerCommand
Symptoms
Warning - Fail to crank. The engine failed to crank when the start command was issued.
Possible Causes
- Starter motor failure or solenoid fault
- Battery voltage too low or wiring loose
Troubleshooting Steps
- Step 1: Check the starter motor and solenoid operation
Starter does not engage - Step 2: Verify the battery voltage and cable connections
Voltage is low or connections are loose
How to Reset
To reset: Fix the starter or battery issue, then acknowledge the warning.
Comments (0)
Share your experience to help others facing the same problem.
Leave a Comment
Source: Cummins Power Generation Control Manual, Cummins Inc.
Category: Generator
No comments yet. Be the first to share your experience!