Applicable Systems
DVP
AH500
AS300
C2000
MS300
Symptoms
An expansion module reports an overload condition. The output current exceeds the rated capacity.
Possible Causes
- Connected load exceeds the module output rating
- Multiple loads on a single output channel
Troubleshooting Steps
- Step 1: Check the total load current on the affected output
Current exceeds the rated capacity - Step 2: Reduce the load or distribute it across multiple channels
Load current is within rated capacity
How to Reset
To reset: Reduce the output load, then power-cycle the module.
Source: Delta DVP PLC Programming Manual, Delta Electronics
Category: PLC & VFD