Applicable Systems
VMC Series
88HS Control
Fanuc 0i-MC
Symptoms
Alarm Limit-Switch: A limit switch has been activated. Check axis position and switch operation.. The CNC system displays this alarm on the operator panel.
Possible Causes
- Refer to the machine manual for detailed cause analysis
- Check related sensors, switches, and parameters
Troubleshooting Steps
- Step 1: Read alarm Limit-Switch on the CNC display and note the full alarm message
Alarm code and description displayed for diagnosis - Step 2: Check the machine status and identify any obvious mechanical, electrical, or pneumatic issues
Visible faults identified or confirmed as intermittent - Step 3: Consult the manufacturer manual for alarm-specific troubleshooting procedures
Root cause identified per manufacturer guidelines - Step 4: Apply the recommended fix and reset the alarm
Alarm cleared and machine resumed normal operation
How to Reset
To reset alarm Limit-Switch: 1) Address the root cause. 2) Press the RESET key on the CNC panel. 3) If the alarm persists, cycle power to the control. Caution: Repeated alarms without fixing the cause may cause damage.
Frequently Asked Questions
- Q: What does alarm Limit-Switch mean?
Alarm Limit-Switch indicates: A limit switch has been activated. Check axis position and switch operation.. Follow the troubleshooting steps to resolve the issue.
Source: HelmanCNC.com - https://www.helmancnc.com/fadal-error-messages-emergency-error-codes/
Category: CNC