Applicable Systems
TransSteel 2700
Symptoms
The welding voltage has reached the maximum limit.
Possible Causes
- The welding voltage has reached the maximum limit.
Troubleshooting Steps
- Step 1: Reduce the welding voltage setting
Check if the issue is resolved - Step 2: Check the wire feed speed
Check if the issue is resolved - Step 3: Verify the welding parameters match the material.
Check if the issue is resolved
How to Reset
Power cycle the welding system and wait for the self-test to complete. If the error persists, contact Fronius service.
Source: Fronius welding technology documentation and xueke.org troubleshooting guide
Category: Welding