High speed run timeout

Fujitec Elevator Medium Elevator

Model: Generic | Code: 30

Applicable Systems
Fujitec Control System

Symptoms

Actual run time exceeds specified time at high speed

Possible Causes

  • Inverter or wiring fault
  • IF61 board fault
  • inverter setting error
  • mechanical resistance

Troubleshooting Steps

  1. Step 1: Check inverter
    Verify the fault is resolved after completing this step.
  2. Step 2: verify wiring
    Verify the fault is resolved after completing this step.
  3. Step 3: inspect IF61
    Verify the fault is resolved after completing this step.
  4. Step 4: adjust inverter settings
    Verify the fault is resolved after completing this step.
  5. Step 5: check for mechanical issues
    Verify the fault is resolved after completing this step.

How to Reset

Power cycle after adjustment

Related Fujitec Fault Codes

Source: baijiahao (huasheng fujitec); toutiao.com/w/1874164112328836

Category: Elevator