Applicable Systems
Haas CNC Mill (VF/VM Series)
Symptoms
The Haas CNC control displays a low air pressure warning. The shop air supply is insufficient.
Possible Causes
- Shop air compressor not running
- Air line leak or restriction
- Air pressure regulator fault
- Air filter clogged
- Air pressure sensor fault
- Control software needs update
Troubleshooting Steps
- Step 1: Record the Haas alarm code 364 and note the machine operating state
Alarm code and context are documented - Step 2: Check the Haas operator manual alarm reference for code details
Alarm description and recommended actions identified - Step 3: Inspect the Pneumatic subsystem for visible faults or damage
No visible damage or abnormal conditions found - Step 4: Check relevant parameters and settings per Haas service documentation
Values match expected settings or discrepancies identified - Step 5: Reset the alarm per Haas procedure and test machine operation
Alarm clears and machine operates normally, or alarm returns
How to Reset
To reset Haas alarm 364: 1) Resolve the underlying fault per the troubleshooting steps. 2) Press the RESET key on the Haas control panel. 3) If the alarm persists, press EMERGENCY STOP, release it, then press RESET. 4) If still present, power cycle the machine. 5) Contact Haas service if the alarm persists after reboot.
Frequently Asked Questions
- Q: What does Haas alarm 364 mean?
Alarm 364 indicates: Low Air Pressure #65. This is a Haas CNC control alarm related to Pneumatic.
- Q: How do I clear Haas alarm 364?
Fix the root cause, press RESET. If persistent, cycle E-STOP and RESET. If still present, power cycle the machine. Contact Haas service if it returns.
- Q: Is Haas alarm 364 critical?
Severity: Minor. Monitor and service at next opportunity.
Source: Haas CNC Alarm List / Haas Service Manual
Category: CNC