Applicable Systems
SKY-2
Symptoms
The elevator reports a fire recall activation. The fire recall function has been initiated.
Possible Causes
- Fire alarm signal received from the building system
- Fire recall switch manually activated
- Fire recall input wiring fault
Troubleshooting Steps
- Step 1: Verify the fire alarm status with building management
Fire alarm status is confirmed - Step 2: Check the fire recall switch position
Switch is in normal position - Step 3: Verify the fire recall input wiring
Wiring is intact and signal is correct
How to Reset
To reset: Confirm fire alarm is clear, then reset the fire recall function.
Source: Otis Elevator Service Manual, Otis Worldwide Corporation
Category: Elevator