Applicable Systems
ThyssenKrupp Control System
Symptoms
Target speed not reached within expected time - code 0D 34
Possible Causes
- Motor torque insufficient
- load too heavy
- inverter output limited
Troubleshooting Steps
- Step 1: Check motor torque settings
Verify the fault is resolved after completing this step. - Step 2: verify load conditions
Verify the fault is resolved after completing this step. - Step 3: inspect inverter capacity
Verify the fault is resolved after completing this step.
How to Reset
Power cycle after adjustment
Source: beijiaxin.cn; zhihu.com/p/577262471; renrendoc MC2-C manual
Category: Elevator