Toshiba VF-AS1 Error Code E11

Toshiba PLC & VFD Critical CPU

Model: VF-AS1 | Code: E11

Applicable Systems
VF-AS1

Symptoms

The VF-AS1 reports a CPU fault. The internal processor detected an internal error and halted operation to prevent unpredictable behavior.

Possible Causes

  • CPU internal firmware error or corruption
  • Watchdog timer timeout due to excessive processing load
  • Hardware defect in the CPU module or memory

Troubleshooting Steps

  1. Step 1: Power cycle the drive to attempt a firmware restart
    CPU restarts successfully after power cycle
  2. Step 2: If the error persists, reload the firmware or replace the drive unit
    New unit operates without CPU errors
  3. Step 3: Check for excessive electrical noise near the drive installation
    No significant noise sources identified

How to Reset

To reset: Power cycle the unit; if the error persists, reload firmware or replace.

Source: Toshiba VF-AS1 Inverter Manual, Toshiba Mitsubishi-Electric Industrial Systems

Category: PLC & VFD