Universal Robots CB3 Error Code C191A26: Not Reduced Mode Output set, while it should not be

Universal Robots Robot Minor System

Model: CB3 (UR3/UR5/UR10) | Code: C191A26

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

Not Reduced Mode Output set, while it should not be

Troubleshooting Steps

  1. Step 1: Check Firmware/update firmware,
    Check if the issue is resolved after this step
  2. Step 2: Conduct a complete rebooting sequence
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot