Universal Robots e-Series Error Code C283A81: The robot configuration specifies an unsupported joint size {signed}

Universal Robots Robot Minor Motion

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C283A81

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

The safety system is not certified to work with the specified joint size

Possible Causes

  • The safety system is not certified to work with the specified joint size

Troubleshooting Steps

  1. Step 1: Upgrade to a newer software version
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot