Universal Robots e-Series Error Code C283A9: System Emergency Stop Output disagreement within the safety system

Universal Robots Robot Critical Safety

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C283A9

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

The input signals are not switching simultaneously, or are incorrectly connected.

Possible Causes

  • The input signals are not switching simultaneously, or are incorrectly connected.

Troubleshooting Steps

  1. Step 1: Ensure both inputs are properly connected,
    Check if the issue is resolved after this step
  2. Step 2: Contact your local Universal Robots service provider for assistance
    Check if the issue is resolved after this step

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot