Universal Robots e-Series Error Code C289A18: The zero current of the IO M8 digital output current sensor exceeds maximum

Universal Robots Robot Minor Power

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C289A18

Applicable Systems
UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

allowed offset. The measured offset was ?A The zero current of the IO M8 digital output current sensor exceeds maximum allowed offset.

Possible Causes

  • allowed offset. The measured offset was ?A The zero current of the IO M8 digital output current sensor exceeds maximum allowed offset.

How to Reset

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Related Universal Robots Fault Codes

Comments (0)

Share your experience to help others facing the same problem.

No comments yet. Be the first to share your experience!

Leave a Comment

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot