Universal Robots e-Series Error Code C305A6: Power supply voltage too high: {float} V

Universal Robots Robot Minor Power

Model: e-Series (UR3e/UR5e/UR10e/UR16e/UR20/UR30) | Code: C305A6

Applicable Systems

UR3 UR5 UR10 UR3e UR5e UR10e UR16e UR20 UR30

Symptoms

Power supply voltage too high: {float} V

Step 1: Check for loose connections,
Check if the issue is resolved after this step
Step 2: Make sure the cable between Control Box and Robot Arm is correctly connected and it has no damage,
Check if the issue is resolved after this step
Step 3: Conduct a complete rebooting sequence,
Check if the issue is resolved after this step
Step 4: Update software,
Check if the issue is resolved after this step
Step 5: Contact your local Universal Robots service provider for assistance
Check if the issue is resolved after this step

Power cycle the robot controller and perform a complete reboot sequence. If the error persists, update the software to the latest version.

Source: Universal Robots Official Error Codes Directory (https://www.universal-robots.com/manuals/EN/PDF/Shared/ErrorCodes/ErrorCodes.pdf)

Category: Robot